All Products


Displaying: 8,737 - 8,760 of 40,046 Matching Items
40,046 Items
View:
Active Filters :
$2.10 MSRP $ 1.56
Qty:
add to cart
$3.55 MSRP $ 2.66
Qty:
add to cart
Part #:302631
Fast-acting 1/4" x 1-1/4" glass tube fuses available with optional axial leads.
$2.60 MSRP $ 1.74
Qty:
add to cart
Part #:302632
Fast-acting 1/4" x 1-1/4" glass tube fuses available with optional axial leads.
$2.41 MSRP $ 1.39
Qty:
add to cart
Part #:302633
Fast-acting ceramic tube fuse
$5.59 MSRP $ 3.72
Qty:
add to cart
$19.99 MSRP $ 15.00
Qty:
add to cart
$ 7.36
Qty:
add to cart
Part #:302636
For superior protection, Eaton recommends upgrading to Low-Peak Class CC fuses. See data sheet No. 1023.:
$64.97 MSRP $ 43.32
Qty:
add to cart
Part #:302637
Low Temperature Self-Regulating Heating Cable (SLCBL) Cut-to-Length Self-Regulating Heating Cable (SLCBL) is ideal for freeze protection and low temperature process maintenance up to 149F (65C). Self-Regulating Heat trace cable self-regulates temperature by automatically adjusting heat output based on surface and ambient temperatures. No temperature controller is required Ideal for freeze protection, roof and gutterde-icing, snow melting systems, and lowtemperature process maintenance up to 150&degF(65&degC) Automatically adjusts heat output based onsurface temperature Safe to overlap and insulate Can be cut-to-length and terminated in the field Moisture, chemical, and flame resistant Specifications Maximum Continuous Maintenance Temperature150&degF (65&degC) Intermittent Exposure Temperature Range -40&degF to185&degF (-40&degC to 85&degC) Nominal Power Output at 50&degF (10&degC) 3, 5, 8, 10, 12W/ft (10, 16, 26, 33, 39 W/m) Supply Voltages 110-120 VAC or 208-277 VACBus Wire Gauge 16 AWG Braid Resistance Tinned copper 0.0055 ohms/ft(0.0182 ohms/m) T-RatingT6 3, 5, 8, 10 W/ft (10, 16, 26, 33 W/m) T5 12 W/ft (39 W/m) Bend Radius 0.5 in (12 mm) NOTE Electrical equipment T-Rating codes define the maximum surfacetemperature that equipment will reach. It is used in hazardous (classified)area applications. Ordinary Locations -B, -BP series only Ordinary Locations Hazardous Location Class I Division 2 Groups A, B, C, D Class II Division 2 Groups E, F, G Class III
$ 4.57 FT
Qty:
add to cart
Part #:302640
General Purpose Constant-Wattage Heating Cable (FE) Constant-Wattage Heating Cable provides precise and constant temperature output regardless of ambient and surface temperatures. Select below your desired cable length, by adding the number of feet to cart for the constant watt heating cable required. Ideal for mid-range process temperature control up to 400F (204C). Ideal heating cable for long run applications. Constant-Wattage Heating Cable provides precise and constant temperature output regardless of ambient and surface temperatures. Select below your desired cable length, by adding the number of feet to cart for the constant watt heating cable required. Temperatures up to 400&degF (204&degC) Power remains constant regardless of temperature Can be cut-to-length at job site Ideal for wide range of general-purpose applications &ndash Mid-range process temperature control for food and chemical processing &ndash Water lines &ndash Fire protection systems &ndash Fuel oil &ndash Condensate return &ndash Hot water lines &ndash Lines periodically purged with 250 psig steam &ndash Not suitable for installation in wet locations and outdoor use
$6.44 MSRP $ 5.95
Qty:
add to cart
Part #:302641
TD101 / TD101X Automatic On/Off Thermostat Controller TD101 / TD101X Automatic On/Off Thermostat Controller Briskheat TD101 / TD101X Automatic On/Off Thermostat Controller is an ideal thermostat for individual circuits requiring a weatherproof device. Typical uses include Temperature control on heat tracing and process fluid system applications Weatherproof on/off thermostat control with temperature sensitive bimetal disc Mounts directly to heated surface Single pole double throw (SPDT) switch TD1010X models are FM Approved for Class 1, Division 2 hazardous areas TD101 is the ideal thermostat for individual circuits requiring a weatherproof device.&bull Heat tracing for fluid systems&bull Freeze protection&bull Outdoor/wet area heating applications&bull Over temperature limit switch or alarm Applications TD101 is the ideal thermostat for individual circuits requiring a weatherproof device.&bull Heat tracing for fluid systems&bull Freeze protection&bull Outdoor/wet area heating applications&bull Over temperature limit switch or alarm
$ 68.00
Qty:
add to cart
Part #:302643
TB250N Bulb-and-Capillary Temperature Controller 2 temperature ranges SPDT switch Suitable for outdoor use Simple dial setpoint NEMA 3R enclosure
$ 267.00
Qty:
add to cart
$ 39.90
Qty:
add to cart
closeout
Part #:302646
CLOSEOUTS Only 26 Left!
Appleton and O-Z/Gedney K-clamps are designed to secure rigid metal conduit IMC or EMT. They can be used across parallel or perpendicular to beam channel and angle supports.
$19.39 MSRP $ 12.95
Qty:
add to cart
Part #:302656
Appleton RB Series reducers are explosionproof and dust-ignitionproof. They are designed to reduce conduit entries to a smaller size and are used in threaded rigid and IMC conduit systems.
$36.03 MSRP $ 29.09
Qty:
add to cart
Part #:302657
FM SLCAB Power Connection Kit (SLCABUC) Power Connection Kit for FM CI/D2 SLCAB Installations SLCAB Power Connection Kit. FM approved for ordinary CI/D2 hazardous area locations. Compatible with SLCAB Heating Cable Enough to completeOne input connection and two end terminations or one input power splice Kit Contents (1) 0.75 IN (19MM) NPT pipe standoff (2) Ring terminals (4) Large, insulated crimp connectors (2) Small, insulated crimp connectors (2) Pipe straps - for 2 in to 6 in (51 mm to 152 mm) O.D. pipes (1) 6 in (152 mm) shrink sleeve (1) Ground Screw (1) 3 oz (89 ml) tube of RTV sealant (1) Roll of fiberglass adhesive tape (1) Caution Label NOTE Requires a 3/4 in (19 mm) NPT junction box (Sold Seperately) Junction box not included with power connection kit.
$ 54.50
Qty:
add to cart
Part #:302662
FE Universal Connection/Termination Kit (FECABUC) FE Series Universal Connection/Termination Kit Provides input power connection/termination for FE constantwatt heating cable Enough to complete one power input connection or one power input splice, three lead terminations and two end terminations. Requires double hub junction box for installation. Kit Contents 3-Lead pouches 2-End pouches 6-Shrink tubes 1-3 oz (89 mm) tube RTV sealant 1-Caution label 2-Ring terminals 2-Splice connectors 12-10 3-Wire nuts 1-1 in NPT Pipe standoff 2- Pipe straps
$ 54.75
Qty:
add to cart
$ 0.08 FT
Qty:
add to cart
$ 137.48
Qty:
add to cart
$42.99 MSRP $ 32.55
Qty:
add to cart
$20.99 MSRP $ 16.00
Qty:
add to cart
Part #:302683
3HP, 1760RPM, 3PH, 60HZ, 182TC, 3632M, TEFC, F1
$ 990.95
Qty:
add to cart
Part #:302694
Accessories Aluminum Back Panel BP1210AL Carbon Steel Back Panel BP1210CS Stainless Steel Back Panel BP1210SS Fiberglass Back Panel BP1210FG Assorted Hubs & Cord Grips Yes 4X Breather Vent REBV4XKIT 4X Drain Vent REDV4XKIT PluggIt Accessories Thermal Accessories Yes :
$273.13 MSRP $ 245.81
Qty:
add to cart
 
Displaying: 8,737 - 8,760 of 40,046 Matching Items