All Products
View:
Active Filters :
closeout
Part #:500890
- CLOSEOUTS Only 24 Left!
- instructions Prepare:
- For best results, clean and dry surface area Apply
$
5.95
Qty:
Part #:315111
- Commercial Spec Grade Receptacle, Side Wire, 20A, 125V, Ivory
Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly.
.032 inch thick, brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face and thermoplastic back body.
Accepts #14 - #10 AWG solid or stranded copper or copper-clad wire.
Terminal compartments isolated from each other for positive conductor containment.
Tri-drive terminal and mounting screws.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140596
Qty:
Part #:315444
- Commercial Spec Grade Receptacle, Side Wire, 20A, 125V, White
Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly.
.032 inch thick, brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face and thermoplastic back body.
Accepts #14 - #10 AWG solid or stranded copper or copper-clad wire.
Terminal compartments isolated from each other for positive conductor containment.
Tri-drive terminal and mounting screws.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Qty:
$
224.00
Qty:
Part #:810250
- 8" Cold Chisels 1"
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:303066
- 15A/125V Trademaster® Duplex Receptacle, Ivory
Durable, high-quality contruction
Rated 15 amperes
125-volt outlet
cULus ListingNumber 140596
Qty:
Part #:303263
- Trademaster® 15A 125V Duplex Receptacle, White
Durable, high-quality contruction
Rated 15 amperes
125-volt outlet
cULus ListingNumber 140596
Qty:
Part #:204036
- SUBMITTAL INFORMATION • Manufactured in compliance with ANSI/AWWA C800 (latest revision)• Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latestrevision) and identified with “NL”• Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNSC83600 -85-5-5-5 (latest revision)• Large wrench flats provided for proper installation• ½” – 1” rated for 100 PSIG water pressure• 1 ¼” – 2” rated for 80 PSIG water pressure• Insert stiffeners required on all flexible plastic connections.:
$
237.00
Qty:
Pass and Seymour Weatherproof 1-Gang Deep 3-Hole Box 3/4in (1 Hole Each Side, 1 Hole In Back) WPBD33
- Weatherproof One Gang Deep Box, Gray
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
4 closure plugs and mounting lugs furnished with all boxes.
UL listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard three-gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:601470
- ABS Standard Dry Gauge Center Back Mount
Attributes
Pressure Range
0-160 PSI
Weight
0.1 lb
Minor Gradient
5
Figure Interval
20
Size
1-1/2" Face
Mount
1/8"
Temperature Range
-40°F to 150°F (-40°C to 65.6°C)
$
11.50
Qty:
$
82.60
Qty:
$
3.25
Qty:
Qty:
Part #:204272
- Plastic CTS Insert Stiffener 0.66" OD
Qty:
Part #:841-341-0781-9400
- Victor Medium Duty G SeriesProduct DetailsEasy-to-read high contrast gauges for clarityColor-coded knobs indicate gas typeDesigned for better comfort when adjusting gas pressureHigh Strength alloy bonnet with nearly twice the yield strength of brassLower profile regulator with less knob stickout
Qty:
Part #:500591
- 7/8" Step Bit (#7)
Durable split-point tip for fast, accuratematerialpenetration.
Patented split-step design optimizes chip load for fast, smooth cutting,and moreholes percharge.
Progressive cutting edges provide balanced aggression to maximizetorqueefficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cuttingspeeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34411
$
62.30
Qty:
Part #:459-34532
- TORX® Tip Screwdrivers - ProGuard&tradeFinish
Fits all TORX® and Starscrews
Burr free tool tips help tools seat fully in screw head
Precision machined tips transfer more torque to the screw and reduces stripping
Broad contact surface provides deep lobe engagement
Straight, vertical sidewalls increase tool engagement and virtually eliminates camout
Qty:
$
179.58
Qty:
Part #:841-348-3000296
- 601 Single Stage Regulators, Oxygen, 0 - 80 psig, 3,000 psig
J.W. Harris 601 Single Stage RegulatorsProduct DetailsThis single-stage regulator is designed to be compact and economical, but with features typically available in more expensive regulatorsIt is used where weight, cost and size are factors
$
179.58
Qty:
Part #:303230
- Weatherproof Two Gang Box, Gray
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:300217
- Sir Nickless&trade Armored Cable Cutter
The Sir Nickless&trade protects armored cable wires by drawing the wires down, creating airspace above the wires and providing room for the cutter blade to shear through and sever the armored casing without nicking the wires within. The Sir Nickless&trade is unique in that it has a curved design that allows the wires to draw down providing room for the cutting blade. The cable Cutter works well on all popular types of armored cable up to 3/8 inch diameter.
Handles all common BX, MCAP®, MC and Flex cables
Blade cuts armor without damage to internal conductors
Splices cleanly through casings with only a few turns
Handle knob stores up to six replacement blades
$
51.07
Qty:
Qty:
Displaying: 7,249 - 7,272 of 39,995 Matching Items