All Products
View:
Active Filters :
Part #:500551
- 3/4" Drive Extensions
&bull Chrome plating provides increased protection from rust and corrosion
&bull Ball and spring socket retention
Qty:
Part #:519065
- Country of Origin CN:
Qty:
Part #:521093
- Country of Origin TW:
Qty:
Part #:521096
- Country of Origin TW:
Qty:
Part #:521097
- Country of Origin TW:
Qty:
Part #:501131
- Round Brute Container, Plastic, 32 gal, Gray
RCP263200GY
Rounded handles make lifting and moving easier, and are reinforced to resist tearing or damage from even the heaviest loads.
Reinforced base is specifically engineered to be dragged over rough surfaces, extending life and overall durability even in the toughest environments.
Colors complement your facility's recycling, sortation, and organization needs.
Seamless construction makes cleaning the container easier.
Stackable design enables nesting for easy transport and storage.
Qty:
Part #:103706
- Male NPTF x Hose Barb Attributes
Weight
0.164 lb
Material
Brass
Male Thread
NPTF
Length
2.19"
Hose ID
3/4"
Hex
7/8"
Male Thread Size
1/2"
$
4.42
Qty:
Part #:713381
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure. All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble. How they work Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss. Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature. Built as tough as the jobs they do Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate. Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads. In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers. Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
closeout
$221.45 MSRP
$
92.40
Part #:303725
- CLOSEOUTS Only 41 Left!
- Switch and Outlet Box
Quick/Click feature secures devices quickly and easily.
Does not strip when over-torqued.
Qty:
Part #:811854
- 1-11/16" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:1184-JHW8-7
- 1-1/2" Drive Adapter 1-1/2" Female x 1" Male 4-1/4"
&bull Specially heat treated for impact use to provide long life, safety, and durability
&bull Pin and o-ring or RET RING® (sold separately) secure tools onto impact wrench for safety and convenience
&bull Universal joint provides 55° range of motion
&bull Suitable for use with pneumatic and electric impact wrenches
&bull Drive end features pin retention hole and groove
Qty:
Qty:
Qty:
Part #:503695
- 1-1/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:303733
- 4-in Round Ceiling Box
Auto/Clamp cable clamps molded in, hold wire securly in box.
UL Listed for fixture support.
For covering patents, see www.legrand.us/patents.
Qty:
Part #:334-DCP18
- Air Chief Industrial Female Threaded Plug Attributes
Weight
0.172 lb
Material
Steel
Thread
NPT
Body Size
1/2"
Temperature Range
-40°F to 250°F (-40°C to 121°C)
Thread Size
1/2"
Flow
150 CFM at 100 PSI
Pressure Rating
300 PSI
$
8.97
Qty:
Part #:502805
-
3/16" Grade 30 Proof Coil Chain, Zinc Plated, 250' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:334-DCP1823
- Air Chief Industrial Female Threaded Plug Attributes
Weight
0.125 lb
Material
Steel
Thread
NPT
Body Size
1/2"
Temperature Range
-40°F to 250°F (-40°C to 121°C)
Thread Size
3/8"
Flow
150 CFM at 100 PSI
Pressure Rating
300 PSI
$
10.03
Qty:
Part #:508915
- 6 GALLON NXT WET/DRY VACThe RIDGID® Model RT0600 vac is the top performer in it's class. Its portable design makes transportingand stowing hassle-free, while the powerful motor gives you enough suction for most common messes.Ideal portability, power, and durability in a compact wet dry vac design.&bull Incredible 4.25 Peak Horsepower &ndash High performance wet dry vacuum.&bull Longer Motor Life &ndash Durable, long-lasting motor backed by industry's best warranty.&bull Polypropylene Drum Construction &ndash Rugged construction to meet the high demands of worksites.&bull 360º Caster Wheels &ndash Provides increased maneuverability.&bull Large Handle &ndash For ease of portability.&bull Accessory Storage &ndash Keeps accessories organized and close by for easy access.&bull Power Cord &ndash 10' Power Cord for Extended Reach.&bull Blowing Capacity &ndash Blow leaves from walkways or decks and debris from job sites, tools, etc.&bull Professional Locking Hose &ndash The ultra-flexible hose won&rsquot pull loose during use, and is four timesmore durable than our standard hose. This 1-7/8" x 8' hose has a smooth interior surface to reduceclogging.&bull Qwik Lock® Filter Fastening System &ndash Install or remove your filter quickly, easily and secure withouttools or fasteners.&bull Includes &ndash Vacuum, owner's manual, 2 extension wands, 1-7/8" x 8' premium locking pro hose, utilitynozzle and standard filter.
Accessories
Catalog No. Model No. Description29848 VT1781 Car Nozzle31718 VT1701 Dusting Brush31723 VT1702 Crevice Tool31728 VT1708 Extension Wand31733 VT1709 Utility Nozzle31738 VT1710 Wet Nozzle40163 VT1712 Crevice Tool/Dusting Brush40168 VT1714 Floor Brush
$
121.95
Qty:
Part #:513127
- 10 mm 12-Point Metric SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
Qty:
Part #:917-67053
- RP 340 PRESS TOOLThe industry-leading RP 340 press tool has a 4" pipe and tubing capacity and weighs only 6 pounds.It features a 180° rotating swivel barrel, perfect for getting at hard-to-reach connections. An available18V Advanced Lithium 4 battery helps the RP 340 achieve as much as 400 presses per charge, andit has an industry-leading service interval of 42,000 cycles. An optional AC power adapter can furthermaximize uptime job site to job site.&bull 30% smaller tool increases maneuverability.&bull 17% lighter tool reduces operator fatigue.&bull More than 400 presses per charge (using Advanced Lithium 4 Battery).&bull Ultimate flexibility with the ability to switch between battery and AC power on the same tool.&bull LED-light for continued operations in no or low-light environments.Versus RP 330-B.AC battery adaptor is not available in Australia.SPECIFICATIONS&bull Capacity &ndash ½" to 4" for Copper and Stainless Steel, ½" to 2" for PEX, ½" to 4" for Steel (½" to 2"with RP 340, 2 ½" to 4" with RP 340 and Press Booster)&bull Head Rotation &ndash 180 barrel/jaw swivel&bull Hydraulic Ram Output &ndash 7,200 lbs. (32kN)&bull Weight &ndash 8.3 lbs./3.76 kg with Advanced Lithium 2 battery, 9.5 lbs./4.3 kg with AC power adapter&bull Operating Temperature Range &ndash 15F to 122F (-10C to 50C)&bull Approximate Cycle Time &ndash 4-5 seconds&bull Service Interval &ndash 42,000 cycles&bull Compatibility &ndash Uses RIDGID Standard Series pressing jaws and attachments. For use with copper andstainless steel tubing, steel pipe, PEX and cutting soil pipe
$
4,488.60
Qty:
Part #:500375
- 9/16" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:500377
- 3/4" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:500380
- 7/8" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Displaying: 7,009 - 7,032 of 39,995 Matching Items