All Products
View:
Active Filters :
Part #:505942
-
1/2" Grade 30 Proof Coil Chain, Zinc Plated, 40' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:521246
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 90 cPs Container Type - Adhesives Bottle Container Size - Adhesives 20 g Adhesive Color Clear Series 401 Gap Fill 0.005 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics Resealable Squeeze Package Tensile Strength 3200 psi Standards 29 CFR 1910.1200, CFIA Application Bonds A Wide Range Of Materials Including Metals, Plastics, and Elastomers
$
33.72
Qty:
Part #:521020
- Product details Legacy part 51005 10 oz Brush Top Can Exclusive Formula Suspends Copper and Graphite in a High-Quality Grease Protects Metal Parts From Corrosion, Galling and Seizing at Temps to 1800 °F Use On Metals, Plastics and Non-Metallic Gaskets description Exclusive formula suspends copper and graphite in a high-quality grease. applications Electrically conductive Aluminum Soft metals features Protects metal from rust and corrosion Resists seizing and galling Temperatures to 1,800 F (982 C) CARB Complies with VOC regulations as detailed by the California Air Resource Board OTC Complies with VOC regulations as detailed by the Ozone Transport Commission Mil-PRF907-F CFIA approved Equipment associated with petroleum chemicals, steel mills, paper plants, marine and foundries
$
33.04
Qty:
Part #:521212
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Tube Chemical Type Dimethacrylate Ester Strength Medium Color White Gas Pressure Range 10,000 psi Begins to Harden 24 hr Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 400 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.21 @ 25 Degrees C Viscosity 350,000cP For Use With NF Application Thread sealing
$
26.91
Qty:
Part #:516691
- Technical Specs
Patching Application Mortars and Patching Cements Item Flooring/Grouting Concrete Repair Color Gray Number of Components 2 Container Size 1 gal Container Style Pail Coverage 4.8 sq ft VOC Less Than 1.0%, 10g/L Flash Point Greater Than 212 Degrees F Starts to Harden Not Specified Full Cure Time Not Specified For Use On Surface Material Concrete, Glass, Steel, Wood Application 000 PSI, Chemically Resistant, Compressive Strength 13, Rapid Setting, Summer and Winter Additives Also Available to Aid Cure Times Characteristics 2-Part, Rapid Set Time Meets OSHA Cured Color Family Grays
$
144.74
Qty:
Part #:201554
- Barricade Safety Tapes 2 Mil Caution Tape 3" Wide x 1,000ft
&bull Rolls are individually labeled with UPC code&bull 2" Black characters on 3" wide yellow tape unless indicated.&bull Ask us about other legends and sizes available&bull Boxed packaging
Qty:
Part #:522125
- Technical Specs
Item Socket Set
Standard Socket Count/Style (14) 12-Point
Deep Socket Count/Style (12) 6-Point, (2) 12-Point
Deep Socket Style/Size 1 in, 1/2 in, 11/16 in, 11/32 in, 13/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, Deep 12-Point 15/16 in, Deep 6-Point 1/4 in
Flex Socket Count/Style 0
Socket Size Range 1/4 in to 1 in
Drive Type Hand
Drive Size 3/8 in
Measurement Type SAE
Sockets Included (1) 1 in Deep 12-Point, (1) 1 in Standard 12-Point, (1) 1/2 in Deep 6-Point, (1) 1/2 in Standard 6-Point, (1) 1/4 in Deep 6-Point, (1) 1/4 in Standard 6-Point, (1) 11/16 in Deep 6-Point, (1) 11/16 in Standard 6-Point, (1) 11/32 6PT, (1) 11/32 in Deep 6-Point, (1) 13/16 in Deep 6-Point, (1) 13/16 in Standard 6-Point, (1) 15/16 in Deep 12-Point, (1) 15/16 in Standard 12-Point, (1) 3/4 in Deep 6-Point, (1) 3/4 in Standard 6-Point, (1) 3/8 in Deep 6-Point, (1) 3/8 in Standard 6-Point, (1) 5/16 in Deep 6-Point, (1) 5/16 in Standard 6-Point, (1) 5/8 in Deep 6-Point, (1) 5/8 in Standard 6-Point, (1) 7/16 in Deep 6-Point, (1) 7/16 in Standard 6-Point, (1) 7/8 in Deep 6-Point, (1) 7/8 in Standard 6-Point, (1) 9/16 in Deep 6-Point, (1) 9/16 in Standard 6-Point
Qty:
Part #:134-J52212
- Country of Origin US:
Qty:
Part #:800026
- Dixon Cam & Groove Type F Adapter x Male NPT Attributes
Maximum Operating Pressure
250 PSI
Weight
1.7 lb
Size
2"
Material
Unplated Malleable Iron
$
42.50
Qty:
Part #:507581
- SUPERFLEX ROLL
The difference between SUPERFLEX and other shop rolls is the cloth backing. This enables SUPERFLEX to be stretched and twisted without fear of snapping or cracking. Each roll is triple flexed to provide the user with the highest degree of flexibility possible with a coated abrasive cloth. Applications include machine shops, tool & die, aviation maintenance, plumbing and general cleaning and degreasing of parts.
$
28.32
Qty:
$
14.63
Qty:
$
0.90
Qty:
Part #:506410
- CRC®CO® Contact Cleaner, 14 Wt Oz
Formula contains no known ozone depleting substances or VOCs. The non-flammable, plastic safe formula is an optimal alternative to CFC, HCFC and flammable contact cleaners. NSF K2 Registered.
Qty:
Part #:501817
- CRC® Lectra Clean® Heavy Duty Electrical Parts Degreaser, 19 Wt Oz
Effectively removes contaminants to increase operating efficiency of energized electrical equipment. It evaporates quickly, leaves no residue and has no flash or fire point. Designed and labeled to be used on equipment where energy and/or residual exists during cleaning.
Qty:
Part #:307191
- 15A NEMA L515 Plug - Black Back, White Front Body
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6/6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
Qty:
Qty:
Part #:410681
- #20 "S" Hook, Zinc Plated
For Attaching Accessories to Chain
After Engaging Chain, Close the "S" Hook to Prevent Disengagement
Standard Material Low Carbon Steel
Packaging 50 Per Carton or 6 Per Bag (Except #120, 2 Per Bag). 10 Bags Per Carton
Order Unit is "Each"
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Qty:
Part #:405675
- #72 "S" Hook, Zinc Plated
For Attaching Accessories to Chain
After Engaging Chain, Close the "S" Hook to Prevent Disengagement
Standard Material Low Carbon Steel
Packaging 50 Per Carton or 6 Per Bag (Except #120, 2 Per Bag). 10 Bags Per Carton
Order Unit is "Each"
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Qty:
Part #:511955
-
3/8&rdquo x 6&rdquo Hook & Eye Turnbuckle, Forged Carbon Steel, Galvanized
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class F
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
25.99
Qty:
Qty:
Qty:
Part #:508597
- SDS PLUS 4CT MX4&trade 5/8" X 10" X 12"
Our MX4&trade 4-Cutter SDS PLUS Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. We designed our MX4&trade 4-Cutter bits with sharp centering tips for exact spot drilling in concrete and metal decking. 4-cutter design prevents lock-up in rebar, reducing downtime. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4&trade 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications. Choose from single bits, bulk packs, or drill bit kits in a variety of sizes.
Qty:
Part #:220175
- Flat Boring Bit 6" Universal Set - 8PC
Get added convenience and reach with the Milwaukee® 8-Piece 6" Universal QUIK-LOK&trade Flat Boring Bit Set. Bore small, clean holes at any angle in a variety of materials. The double wing spurs provide easy hole formation while reducing vibration and preventing "break out." The patented cutting edge produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. The Universal QUIK-LOK&trade allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8" bits plus a 6" QUIK-LOK Extension in a carrying case.
Qty:
Part #:521570
- 4" Full Cable Twist Knot Wheel - Stainless Steel
The Full Cable Twist Knot Wire Wheel is designed for general heavy duty cleaning of scale, surface oxidation, rubber flash, heavy burrs and weld splatter. Full Cable Twist Knot Wire Wheels are available in carbon and stainless steel. This Cable Knot Wire Wheel is designed for use with 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of stainless steel.
Qty:
Displaying: 2,929 - 2,952 of 40,046 Matching Items